D-STAR Gateway — XLX428 A
Connect any D-STAR radio/hotspot to
DMR Gateway — XLX428 G
Pi-Star / WPSD must use DMR Gateway (not a single DMR master).
Enable XLX, set reflector
Private call
Talk on TG 6 group call, timeslot 2. Module change TG is
QSO One / BrandMeister TG 6 or 9 will not reach this reflector.
Transcoding / VPS — please read
XLX428 runs on a cloud VPS. There is no USB AMBE dongle (ThumbDV) on this server, so D-STAR ↔ DMR ↔ analog is software transcode, not hardware AMBE.
D-STAR-to-D-STAR on A and DMR-to-DMR on G stay in that mode and should sound normal. Cross-mode (D-STAR A to DMR G, or either mode to AllStar/IRLP) is decoded to analog and re-encoded on the VPS — it can sound thin or a bit muffled. That is expected, not a radio problem.
Connect any D-STAR radio/hotspot to
XLX428 module A.
Bridged to AllStar Hub 42121 and IRLP exp0087.DMR Gateway — XLX428 G
Pi-Star / WPSD must use DMR Gateway (not a single DMR master).
Enable XLX, set reflector
XLX428, startup module G.Private call
68428 = connect XLX428 · Private call 64007 = module GTalk on TG 6 group call, timeslot 2. Module change TG is
4007 (not a talk TG).QSO One / BrandMeister TG 6 or 9 will not reach this reflector.
Transcoding / VPS — please read
XLX428 runs on a cloud VPS. There is no USB AMBE dongle (ThumbDV) on this server, so D-STAR ↔ DMR ↔ analog is software transcode, not hardware AMBE.
D-STAR-to-D-STAR on A and DMR-to-DMR on G stay in that mode and should sound normal. Cross-mode (D-STAR A to DMR G, or either mode to AllStar/IRLP) is decoded to analog and re-encoded on the VPS — it can sound thin or a bit muffled. That is expected, not a radio problem.
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
